Glass Ice Bucket Cap 29.2
Details about Glass Ice Bucket Cap 29.2
Entire height: approx. 18cm
Bucket diameter: approx. 11.5cm
Filling level: approx. 11cm
Ground glass joint: 29.2
Ice Bucket Cap - The pre-cooler for hookahs
The Ice Bucket Cap insert by Kaya Shisha is a glass pre-cooler for hookahs with a standardised ground glass joint of 29.2mm. The insert can be used with hookahs made of metal as well as with hookahs made of glass.
Depending on the construction of the hookah, it is possible to attach the pre-cooler directly to the hookah glass, to the base or to the smoke shaft.
How to use the Ice Bucket Cap Precooler
Once you have decided on the place where you want to attach the precooler, it can be attached to the matching ground glass socket using the male ground glass joint.
Afterwards, the container is filled with ice cubes or coarse crushed ice. This should subject the smoke to an initial cooling process before it reaches the water in the hookah bowl.
Tip: If the hookah is extended from the Ice Bucket with another insert made of glass, the ice should only be filled in once the insert has been placed inside. This way, the space in the Ice Bucket can be used to its full potential.
When using the Kaya glass ash plate with the Ice Bucket, a little dexterity is required when filling, as the ash plate reduces the space available for filling. In this case, it is advisable to pile up the ice towards the rim and then carefully place the ash plate on top. This leaves the ground glass joint unimpeded and the largest possible amount of cooling ice can be filled into the pre-cooler.
|Product weight||0.55 kg|
|Delivery time||Versand nach Zahlungseingang|