Team 29.2-Set ELOX Cut Adapter Blue with Glass Plate
Bowl Adapter ELOX (M18xM1 thread)
Height: approx. 3.5cm
Bottom diameter: approx. 2.4cm
Upper diameter: approx. 1.7cm
Thread: M18xM1 fine thread
29.9 Konik bowl adapter
Height: approx. 4.5 cm
Diameter: approx. 3.5 cm
Suited for standardized 29.2 ground glass joints
Ash plate with metal fringe
Diameter: approx. 25cm
Diameter of the hole: approx. 2cm
Glass thickness: approx. 5mm
Material: borosilicate glass
The Team 29.2 Konik adapter ELOX by Kaya Shisha is quite versatile. The male 29mm ground joint allows you to combine metal hookahs with glass accessories of the same joint size and vice versa. The O-rings on the adapter serve as a buffer zone and prevent the more sensitive glass parts from taking irreparable damage due to the different expansion properties of the materials.
How to use the Team 29.2 Konik Bowl adapter:
Place an ash plate of your choice over the thread and connect the Konik bowl adapter with the bowl adapter.
The 29.2 Konik bowl adapter offers you different application possibilities:
- Now you can use a metal ash plate without hesitation in combination with a 29er column of a glass hookah.
- Use the structure described above to install a glass molasses catcher or a glass smoke column on a 29-mm metal shisha (such as the ELOX CUT or INOX Sebulba).
- You would like to use a metal molasses catcher on a glass stem? Screw the Konik Bowl adapter in the lower thread of an ELOX or INOX molasses catcher. Place on the latter an ash plate of your choice. Afterwards attach the bowl adapter to the top. Now you can easily use the metal molasses catcher on a 29.2 hookah stem made of glass.
Scope of delivery:
1x Bowl adapter
1x Konik bowl adapter 29.2
1x Glass ash plate
Note: The plate is not heat-resistant and is only used to ash off coal cubes.
EAN | 4056159115078 |
---|---|
Product weight | 0.77 kg |
Age verification | No |
Manufacturer | Kaya Shisha |
Cut | 29.2 |
Delivery time | Versand nach Zahlungseingang |